Issue 5 (2014)

Issue Highlights:

"TowerPower" launch points to reduced costs for offshore wind inspections

In May 2014, the 11 partners of the European collaborative project “TowerPower“ met in Aix-en-Provence/France to launch a programme of work to develop a remote real -time monitoring system for ageing diagnosis of of...

"Fabtech 2014" has Georgia on its mind

“Fabtech“ is flying south for November: North America’s largest metal forming, fabricating, welding and finishing event is expected to attract over 27,000 attendees and 1,400 exhibiting companies to the Georgia Worl...

Brazing tungsten carbide - Part 2: Brazing filler materials and fluxes for use with tungsten carbide

The most popular families of alloys for the brazing of tungsten carbide are those that contain silver. Such materials have the benefit of low working temperatures, excellent wetting characteristics, high shear and t...

Content

6 / 33 Articles:

Designing thin sheet joints executed with little heat in a way appropriate for operation

Prof. Dr.-Ing. Alfons Esderts, Dipl-Ing. Christian Wilmes, Dr.-Ing. Driss Bartout, Prof. Dr.-Ing. Rainer Stark, Dr.-Ing. Thomas Nitschke-Pagel, Prof. Dr.-Ing. Prof. h. c. Klaus Dilger

Specialist Articles, 305 - 309

Study on the effect of hot spots generated by induction heating to prevent hot cracking during laser welding of the aluminum alloys AA6082T6 and AA5754H22

Dipl.-Ing. Stefan Holland-Moritz, Somonov Vladislav, Dipl.-Ing. Stephan Völkers, Dipl.-Ing. Markus Geyer, Prof. Dr.-Ing. Prof. h. c. Stefan Böhm

Specialist Articles, 310 - 318

Investigating the indentation, degrading and deterioration of electrodes using carbon and stainless steel welds in resistance spot welding

Charde Nachimani, Yusof Farazila Binti, Rajkumar Rajprasad Kumar

Specialist Articles, 319 - 324

Issue 5 (2014)

Issue Highlights:

"TowerPower" launch points to reduced costs for offshore wind inspections

"Fabtech 2014" has Georgia on its mind

Brazing tungsten carbide - Part 2: Brazing filler materials and fluxes for use with tungsten carbide

Designing thin sheet joints executed with little heat in a way appropriate for operation

Study on the effect of hot spots generated by induction heating to prevent hot cracking during laser welding of the aluminum alloys AA6082T6 and AA5754H22

Investigating the indentation, degrading and deterioration of electrodes using carbon and stainless steel welds in resistance spot welding

Editorial Preview

Books

Imprint/Ad Index

More content

Welding and Cutting

Issue 2 (2024)

Welding and Cutting

Issue 1 (2024)

Welding and Cutting

Issue 2 (2023)

DVS Media GmbH

More Journals

Newsletter subscription